opinions......

Turbo and Supercharger discussion
 Reply
User avatar

opinions......

By oscar m
- Thu Sep 27, 2007 8:35 pm #24359 ok i know many ask this but at the end i don't know if they did do it............should i boast my d15b7 motor?
User avatar

By Chance
- Thu Sep 27, 2007 8:42 pm #24361 doooo it
User avatar

j

By oscar m
- Thu Sep 27, 2007 8:51 pm #24364 ok.......i had many replies about that.........i also read that b18b pistons will work on my d15,is it true? and like hahaha...wuts a good turbo brand setup? and will it handle the daily drive?
User avatar

By teal_dx
- Thu Sep 27, 2007 8:52 pm #24365 just research and do it right so you don't blow it up. how many miles are on it? how does it run right now? and How much do you want to spend on boosting it? is it your daily driver street car or will you use it for any kind of racing too?
We'll help you figure out what will work best :thumb:
User avatar

g

By oscar m
- Thu Sep 27, 2007 8:54 pm #24366 ok....it has about 110 to 118k miles on it...........it runs super clean no smoke nor oil leakages......its ganna be for daily drive since i go to college..........and not more than buying a damn b-series motor.....
User avatar

By teal_dx
- Thu Sep 27, 2007 8:54 pm #24367 B pistons are too large to put in a D block. whoever told you that was on crack. D series is 75mm bore. bore it .020 and you'll be at 75.5mm. Then you can use a set of pistons from a Suzuki Vitara as a cheap upgrade from stock.
User avatar

d

By oscar m
- Thu Sep 27, 2007 8:57 pm #24368 actually many ppl said they do fit but if they don't they don't hahaha.....welll i know by fact the rods are like really thin.......i need like a good rod that can handle like 10psi.......but i'm scared that boast my blow my engine since i can't rev past 5,900, but idk once have mods on the engine bay......i can past that limit..can i?
User avatar

f

By oscar m
- Thu Sep 27, 2007 9:03 pm #24370 hmmm.......ok since i got that rods and pistons is there any cutting adding in the engine?and wut else do i need besides eagle rods(but wuts the one that can handle more than eagle rods,i'm welling spend on the rods) and the piston?
User avatar

yh

By oscar m
- Thu Sep 27, 2007 9:23 pm #24372 wuts better.......eagle H beams or arias forged pistons?
User avatar

By chnzgoofball
- Thu Sep 27, 2007 9:38 pm #24375 i say DO RESEARCH then BOOST!! :woot: i heard good things about both those companies for rods... i kno more ppl with eagle rods tho :thumb:
User avatar

Re: h

By teal_dx
- Thu Sep 27, 2007 10:06 pm #24383
oscar m wrote:http://cgi.ebay.com/ebaymotors/88-00-Civic-CRX-Del-Sol-D15-D16-T3-T4-T04E-Turbo-Kit-C_W0QQcmdZViewItemQQcategoryZ33742QQihZ017QQitemZ270168458611QQrdZ1QQsspagenameZWDVW




is this turbo good enough for my b15b7 motor?i still have to get the engine externals.....


looks to be generic no name brand stuff.... you get what you pay for when it comes to auctions like those. Especially stay away from SSautochrome stuff
User avatar

Re: yh

By teal_dx
- Thu Sep 27, 2007 10:07 pm #24384
oscar m wrote:wuts better.......eagle H beams or arias forged pistons?


you're comparing apples to oranges....

Eagle makes good rods and Arias makes good pistons
 Reply
Return to Boost