- Fri Jul 15, 2011 6:31 am
#263646
I'm almost about half way done collecting my first setup of parts. I have about 90% of a turbo kit. I also have a Z6 block and 2 Z6 heads 1 is for my B7 that i'm pulling out of the civic (gonna go into my bro's civic as a mini-me). I'm shooting for between 200 - 300 hp just a rough goal not getting my hopes up this is going to be a starter build just to get used to engine building and boosting.
First question is for the Z6 would this be a good purchase for the block http://fjdistributors.com/product_info. ... cts_id=170 .
If so which bearings should I get with the kit? Will the bearings work or how do I go about getting the right ones size wise? The crank and bearings all look factory and pretty good shape very used ,but good.
Second question is if I get this kit should I order some custom length rods or just get a different set all together(like eagle or another company can't think of any right now).
Third question is factory wise which parts are limiting on power? Other then these I will be swapping injectors, fuel pump, tb, fpr, the car already has 2.5" exhaust its got a straight threw magnaflow to 4" fart can with silencer for the police. I will be running a P28 chipped with either S300 or Crome haven't figured out what I want to do with this yet.
Answers and ideas welcome thanks in advance for those who write.
First question is for the Z6 would this be a good purchase for the block http://fjdistributors.com/product_info. ... cts_id=170 .
If so which bearings should I get with the kit? Will the bearings work or how do I go about getting the right ones size wise? The crank and bearings all look factory and pretty good shape very used ,but good.
Second question is if I get this kit should I order some custom length rods or just get a different set all together(like eagle or another company can't think of any right now).
Third question is factory wise which parts are limiting on power? Other then these I will be swapping injectors, fuel pump, tb, fpr, the car already has 2.5" exhaust its got a straight threw magnaflow to 4" fart can with silencer for the police. I will be running a P28 chipped with either S300 or Crome haven't figured out what I want to do with this yet.
Answers and ideas welcome thanks in advance for those who write.