Civic EG

i have the 95 honda civic special edition abs 4 wheel disc ext ext im boosting my gsr in it and im curious if i hook up my brake booster still cuzz immboosting or do i have a check valve that will help this issue?

what are you trying to figure out
if your brake booster will still work if you have a boosted motor

There should be a check valve in the middle of the vac line between the intake mani and booster. You can use the hose between the valve and the intake for a vaccum source for bov/wastegate/gauges/etc. you cannot use the hose from the valve to the booster, then you'd have no brakes.

yeah i feel dumb i found it last night after i put my engine in i had a blond moment haha and which port are you talking about that i can use for gauges and boost i have a vaccum block should i just plug that stuff to that

Run the vac block on that 3/8" hose between the check valve and the intake mani

so you want me tu run the brake check valce to the vaccum block and then what do i run to the manifold?

Run it in-line. Here's mine..

where are the other hoses running too?

Wastegate, blow off valve and boost gauge

the waste gate gets one?