Page 1 of 1

DSM 450cc injectors??

PostPosted: Thu Jun 12, 2008 7:09 am
by flyinryan122
Do dsm 450's require a resistor box to be wired in?

PostPosted: Thu Jun 12, 2008 7:44 pm
by teal_dx
Yes

PostPosted: Fri Jun 13, 2008 4:33 am
by flyinryan122
Lol. Thank you!..

I've heard you can get a resistor box from an accord and that will work.

Is this true?

PostPosted: Fri Jun 13, 2008 1:49 pm
by teal_dx
Maybe they have them, I know that some Preludes and CRX's have them.

I just typed in resistor box on ebay and found mine for like $12

PostPosted: Fri Jun 27, 2008 5:06 pm
by SloppyYoda
i'm glad i saw this as i just picked up a set of these. how would one go about wiring that up?

PostPosted: Fri Jun 27, 2008 6:57 pm
by teal_dx
http://civic-eg.com/viewtopic.php?t=17

there's a thread about the resistor box :thumb:

PostPosted: Sat Jun 28, 2008 3:48 am
by SloppyYoda
teal_dx wrote:http://civic-eg.com/viewtopic.php?t=17

there's a thread about the resistor box :thumb:


maybe if i had searched... :oops:

PostPosted: Mon Jul 21, 2008 8:00 pm
by SloppyYoda
ok so how much resistance is needed?

instead of doing a box i think im going to just run to radio shack and buy separate resistors and wire them in individually rather than have a box

PostPosted: Mon Jul 21, 2008 9:50 pm
by joba356
SloppyYoda wrote:ok so how much resistance is needed?

instead of doing a box i think im going to just run to radio shack and buy separate resistors and wire them in individually rather than have a box


you need 10ohm 10 watt inline resistors, and they do sell them in radioshack

As for the accord question, they do have the resistor box and you can use it, thats what i got with my dsm injectors