so now its all in. but not running yet. Im missing the back braket that holds the shift link to the tranny. so i got to go to pick a part to get one. how lame
- Thu Jun 23, 2011 8:26 am
#260539
so now its all in. but not running yet. Im missing the back braket that holds the shift link to the tranny. so i got to go to pick a part to get one. how lame
so now its all in. but not running yet. Im missing the back braket that holds the shift link to the tranny. so i got to go to pick a part to get one. how lame
- Fri Jun 24, 2011 5:03 pm
#260808
Anyways, so now my car has a freshly rebuilt tranny in it, and jdm engine with all new seals and gaskets with about 35-45k mils on it with a new timing belt and water pump. 0 mils on the new stage 1 clutch and 8lb fly wheel. Brand new D16z6 dizzy, cap rotor and 10mm wire set. also when over the engine and tranny and starter with a wire brush by hand to clean it all up.
So all I need now are some lil things for in side of the car and it will be like new.
So all I need now are some lil things for in side of the car and it will be like new.
- Fri Jun 24, 2011 5:07 pm
#260809
Yesterday I when to the pick-a-part, and found a civic that only had the ecu missing.... thats all that was gone. So I got a lx/ex cluster with 160k mils on it with rpms, a gray arm rest with ash tray, 4 door rear wing with leg light, clock, H emblems, and other lil things.
So if any one wants to buy the cluster, arm rest or wing let me know.
So if any one wants to buy the cluster, arm rest or wing let me know.
- Sat Jun 25, 2011 2:53 pm
#260937
Get a better Exhaust manifold you will thank me.
- Tue Jun 28, 2011 4:27 pm
#261382
Or a Z6
xwhitchx wrote:Blk95coupe wrote:Get a better Exhaust manifold you will thank me.like a y8 one? =P
Or a Z6
- Wed Jul 13, 2011 6:17 am
#263422
Some New Updates:
Had an overheating problem: Changed the radiator, and got a slim fan.
When It was hot out side the brake peddle would sink to the ground: Got a new Brake Master Cylinder, also I have all new rotors and brakes on there way.
Clutch Master Cylinder was leaking in to the car: Got a new one and clean the line out of all the old black fluid.
Car would star up and die, there was no noise from the fuel pump: Got a new fuel pump, now its load as hell lol.
Didn't have v-tec: got a p28 ecu
Ill get some pictures of the engine bay soon.
I really don't know what I have not replaces on this car =P
Had an overheating problem: Changed the radiator, and got a slim fan.
When It was hot out side the brake peddle would sink to the ground: Got a new Brake Master Cylinder, also I have all new rotors and brakes on there way.
Clutch Master Cylinder was leaking in to the car: Got a new one and clean the line out of all the old black fluid.
Car would star up and die, there was no noise from the fuel pump: Got a new fuel pump, now its load as hell lol.
Didn't have v-tec: got a p28 ecu
Ill get some pictures of the engine bay soon.
I really don't know what I have not replaces on this car =P
- Sun Jul 17, 2011 7:39 pm
#263880
yea them headlights
xwhitchx wrote:94_jdm_ferio wrote:i think u should sell me your headlights
but looks nice man!
vtec ftw!!!
lol my plastic "jdm" lights with hids in them =P
and thank you, all I need now is a p28 ecu and Im all done.
yea them headlights