Civic-EG.com Forum 3.3.1

- Wed Dec 05, 2012 10:34 pm #321679 I am currently in the process of planning out my next build i recently spun a bearing in my bottom so now that its time ot rebuild im looking for what ever input i can get. What im trying to do is go with 13:1 forged pistons sleeved block and i would like to to run a 150 shot. The motor currently has Skunk 2 stage 2 pro series cams. Is 13:1 to high for that much nitrous?? I am still on the line about using race gas. Any input would be greatly appreciated

- Thu Dec 06, 2012 1:08 am #321683 High compression and nitrous go hand in hand. Don't be shy!!

Definitely check out the nitrous thread in the forced induction section of honda-tech, it's got everything you'd ever need to know about spraying a honda.

600whp Turbo 84mm LS/Vtec Drag Hatch

- Thu Dec 06, 2012 3:46 am #321694 that would be a great setup. you may wanna lookin into breakin it up between 2 stages so you can come off the line for instance on a 100 shot then when you hit second you can hit the other stage and be on a 150 shot

- Fri Dec 07, 2012 12:39 am #321764 thank you for the input guys a gas station in a neighboring town sells 110 right out of the pump do you guys think that will be good enough for the 13:1