D15, D16, D17 and Mini-Me swaps
By MarinePoolee
#139466 I am looking for a D16z6 motor and tranny to put into my 93 civic cx, where can I find one and how much can I expect to pay?

Anything else I am going to have to have to go with this engine?
User avatar
By chrono404
#139471 I bought an engine of craigslist. However their is a risk of buying a bad engine when you do this. I personally got a bad engine and had to rebuild mine. You can see what I went through in my Sedans build thread.

If you Decide to go on Craigslist, Which i wont recommend, You can expect to pay 600-800. If you get a Engine off Craigslist you will also need its ECU(p28) and Transmission. On the side next to the differential it should have "b000" stamped on it. Make sure to look over everything carefully if you go this route.

Getting a 92-95 "ZC VTEC"(Basically a D16z6 in Japan) or JDM D15B VTEC(Dont get the VTEC-E Version.) Will net you a Very Similar engine to the D16z6. Both are JDM(Japanase Domestic Market) Engines and should have 30-35k on them. You can get them from any Engine import shop. If your import shop is incompetent like my local import shop, You can by them online on Sites like hmotorsonline and TigerJapanese, Both sell their d15b VTEC for $550 + Shipping. Transmissions are additional and you will want them. The JDM d15b VTEC comes with an optional LSD Transmission, If you can you want to get that.

Despite weither you get a D16z6, ZC VTEC,or JDM d15b, You need to wire VTEC. Its not hard and there are walkthroughs in our DIY Section on building a Mini-me, It explains how to hook up your VTEC Wiring. Chances are the engine you get will come with a Wiring harness and this already hooked up.
By MarinePoolee
#139499
chrono404 wrote:I bought an engine of craigslist. However their is a risk of buying a bad engine when you do this. I personally got a bad engine and had to rebuild mine. You can see what I went through in my Sedans build thread.

If you Decide to go on Craigslist, Which i wont recommend, You can expect to pay 600-800. If you get a Engine off Craigslist you will also need its ECU(p28) and Transmission. On the side next to the differential it should have "b000" stamped on it. Make sure to look over everything carefully if you go this route.

Getting a 92-95 "ZC VTEC"(Basically a D16z6 in Japan) or JDM D15B VTEC(Dont get the VTEC-E Version.) Will net you a Very Similar engine to the D16z6. Both are JDM(Japanase Domestic Market) Engines and should have 30-35k on them. You can get them from any Engine import shop. If your import shop is incompetent like my local import shop, You can by them online on Sites like hmotorsonline and TigerJapanese, Both sell their d15b VTEC for $550 + Shipping. Transmissions are additional and you will want them. The JDM d15b VTEC comes with an optional LSD Transmission, If you can you want to get that.

Despite weither you get a D16z6, ZC VTEC,or JDM d15b, You need to wire VTEC. Its not hard and there are walkthroughs in our DIY Section on building a Mini-me, It explains how to hook up your VTEC Wiring. Chances are the engine you get will come with a Wiring harness and this already hooked up.


Well the engine will not be being put in by me, so hopefully a mechanic will know more about what you are talking about, as I dont. :lol:

I plan on having the engine rebuild upon getting it, but whats the possibility of finding it from a junkyard?
User avatar
By teal_dx
#139503 Junkyard is a good possibility. Just be sure it is complete and spinning freely. There's still a change it may need a rebuild but since you are planning on doing that anyways....
By MarinePoolee
#139612
teal_dx wrote:Junkyard is a good possibility. Just be sure it is complete and spinning freely. There's still a change it may need a rebuild but since you are planning on doing that anyways....


went to 2 junkyards today... and none
User avatar
By Kris95DX
#151059 Not trying to jack the thread and this probably doesn't help you because i live in MA, but i just got a full D16z6 engine w/ tranny and axles 187K, asking $350.