- Sun Nov 08, 2009 3:00 am
#155369
will a 5 speed z6 intake be ok on an auto? or will i have to change something?
- Sun Nov 08, 2009 8:10 am
#155392
It should.
- Sun Nov 08, 2009 11:31 am
#155409
I would check on whether you need to change from a 3 wire IACV to fit an auto, which i think uses a 4 wire IACV. dont know for sure though.
::: 1992 Civic Si ::: 1992 Integra GS-R :::
GREDDY EVO 2 FTMFW #2 ..... >100,000 mile club!

::: 1992 Civic Si ::: 1992 Integra GS-R :::
GREDDY EVO 2 FTMFW #2 ..... >100,000 mile club!
- Sun Nov 08, 2009 7:05 pm
#155439
Thats on the EK. EG doesn't have this issue.
The intake manifolds are the same. The throttle bodies are different between auto and manual.
Dippin_EG wrote:I would check on whether you need to change from a 3 wire IACV to fit an auto, which i think uses a 4 wire IACV. dont know for sure though.
Thats on the EK. EG doesn't have this issue.
The intake manifolds are the same. The throttle bodies are different between auto and manual.
- Mon Nov 09, 2009 2:45 am
#155497
so i will be ok to just swap the throttlebodys?
- Mon Nov 09, 2009 3:19 am
#155504
yepperz throttle bodies like suspendedhatch said are the only difference on our egs...
d4rk13l4de wrote:so i will be ok to just swap the throttlebodys?
yepperz throttle bodies like suspendedhatch said are the only difference on our egs...
1980 volvo 242
2001 crv
not using punctuation or good sentence structure since day 1
2001 crv
not using punctuation or good sentence structure since day 1
- Mon Nov 09, 2009 4:16 am
#155528
thanks again guys, civic-eg in my opinion is the best for info!! you guys all rock