ok

D15, D16, D17 and Mini-Me swaps
 Reply

ok

By jordy478
- Fri Jan 22, 2010 12:02 am #170165 ok well its a 1995 civic lx with a d16z6 swap.....i dont have vtec hooked up and i dont have the p28 computer......and it throwin a check engine light with codes 43.....and 20 i believe which ever one is for crank shaft position sensor
User avatar

By teal_dx
- Fri Jan 22, 2010 1:10 am #170177 http://civic-eg.com/viewtopic.php?t=1558

for a list of the codes and what they mean.

43 = Fuel Supply, 20 = Electrical Load Detector

You should really get the right ECU for your engine before you start troubleshooting. If you're using the lx ecu then the air/fuel maps will be incorrect for the z6.

The ELD in located in the underhood fuse box. Last time I checked, Honda doesn't sell just the ELD so you would have to buy the whole fuse box from the junk yard. Often the ELD will be fine, and the code can be caused by another problem in the electrical system. Are your headlights flickering at night? (common symptom of problem)

For the Fuel supply, how old is the fuel filter?

o

By jordy478
- Fri Jan 22, 2010 12:28 pm #170298 well i started off the car with a d15b7 in it and it up and stopped workin on me....and i bought the d16z6 off a buddy for 130 buck....then completely oem rebuilt it...so i was kinda broke when it comes to buy a computer lol....but i stared this tread off just wondering y it wouldnt rev over 3000rpm and wat that was called bcause my d15b7 did the same thing before it died...but it was only running 3 cylinders
User avatar

By teal_dx
- Fri Jan 22, 2010 1:51 pm #170302 why would you try to rev over 3k when you have check engine lights? Maybe your ecu is trying to prevent you from destroying another engine. When you get the engine running correctly with no CEL's then you would be better off revving it high.

o

By jordy478
- Fri Jan 22, 2010 1:55 pm #170305 it just recently started doin this...and i havent since the check engine light came on....ony reason i found this out was because i was tryin to pass some one and was reving up to 3000rpm and it wouldnt go up higher it just stayed there....but the first engine i think was messed up when i got the car..i just recently got into the honda game
 Reply
Return to D Series