D15, D16, D17 and Mini-Me swaps
User avatar
By dro21
#189904 the engine its self would fit in the trunk but idk if engine and tranny would fit.
By AutoXCivic
#189971 Got a friend with a truck?
User avatar
By Classiccarsrule85
#189976 make sure the oils drained....take out the p.side seat have your buddy sit in the back bring some wrenches sockets etc tools to pop the trans off if it comes with one and then plop the trans in the back fold one seat down and place shift linkage etc there....(make sure you place some plastic down so you are able to defend your plastic and fabrics against grease and oil.......

then place motor where the p.side seat was and then your all set....this is how i transported my b series and countless other motor swaps hatches are like trucks i love them but yea just make sure all fluids are drained and you have some help motors are heavier then they appear
User avatar
By momoyouknow
#189981 hah.. thanks for all the suggestions i'm probably gonna go w/ taking the pass seat out since i don't know anyone here let alone one w/ a truck
User avatar
By AStar59
#189997 my buddy and i got a engine and trans still connected to fit in the trunk of his hatch.
User avatar
By suspendedHatch
#190043 I've done it. Take your rear plastic and carpet out if you care about it, then line the trunk with a few layers of cardboard. Also some towels because I guarantee you that fluids will leak out.
User avatar
By Classiccarsrule85
#190044
AStar59 wrote:my buddy and i got a engine and trans still connected to fit in the trunk of his hatch.


im just saying take it apart so its lighter thusly being easier to manage