- Tue Jun 22, 2010 8:22 pm
#201582
what are the best pistons and rods to get for this motor if i boost it?i wanna push around 15-20psi on a GT30,with RC 750cc injectors HKS bov and Tial wastegate.Im getting a civic soon with this swap,but i want to build it up.so plz help me out before i make a wrong choice.
- Wed Jun 23, 2010 6:16 am
#201654
26 views and no1 knows which pistons i should use?
- Wed Jun 23, 2010 6:42 am
#201660
I dont see the point of a D16y8 Minime. A Minime build is when you put a D Series VTEC head on a Non-VTEC D Series. However the D16Y8 is vtec, Why would you put a different vtec head on it?
For Rods and Pistons, Eagle Rods and Vitara Pistons are a popular setup.
Pretty Sure a D Series will not be able to fully spool a GT30, Especially to 15-20 Pounds.
You probably should do more turbo research before embarking on this path. Unless you want to be a Dyno Queen a Smaller turbo that will give you more usable power is a good idea.
TurboD16.com is a very good resource, as well is our Turbo Section.
For Rods and Pistons, Eagle Rods and Vitara Pistons are a popular setup.
Pretty Sure a D Series will not be able to fully spool a GT30, Especially to 15-20 Pounds.
You probably should do more turbo research before embarking on this path. Unless you want to be a Dyno Queen a Smaller turbo that will give you more usable power is a good idea.
TurboD16.com is a very good resource, as well is our Turbo Section.
Last edited by chrono404 on Wed Jun 23, 2010 5:08 pm, edited 1 time in total.
- Mon Jun 28, 2010 7:40 am
#202335
thnx guys.ive done some researching,and got the specs on the car due to it sitting in my driveway.its a D16 block with a Y8 head.Sorry.But I appreciate the feedback.My mistake on the mess up.Im just getting into the civic scene,so plz dnt mind my little errors.Im planning on goin with a Turbonetics T3/T4 turbo...But i really do appreciate the feed back.