Civic-EG.com Forum 3.3.1

- Thu Aug 12, 2010 7:05 pm #208659 ok so i changed my clutch today on my d16z6... i marked and removed my dizzy so i know where to tighten it down to.. so now that i put ever thing together and rechecked everything was plugged up in the right connnections it sputters and back fires when i give it gas...sounds like a subaru. lol i jumped the ecu to do the timing and i got a code 7..tps? can the tps be doing all this?? It never did this before i put the clutch in..

[teal_dx]

- Thu Aug 12, 2010 7:27 pm #208671 are the plug wires in the right order? sounds like you may have 2 of them switched.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Thu Aug 12, 2010 8:42 pm #208689 can you show me a diagram of how they go? cause i switched them and now it doesnt even turn on..

[teal_dx]

- Thu Aug 12, 2010 11:45 pm #208724 http://techauto.awardspace.com/ignition.html

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Fri Aug 13, 2010 6:26 am #208795 problem solved

[teal_dx]

- Fri Aug 13, 2010 1:03 pm #208805 so it was the wrong firing order then?

I've been there a few times, it was a very experienced guess

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Fri Aug 13, 2010 5:51 pm #208844 yeah aha they were all mixed up...