Civic-EG.com Forum 3.3.1

- Sat Aug 28, 2010 5:12 pm #210965 If I were to buy a cold air intake for a EX or SI civic would it fit my CX or would I have to do some modification? The reason I ask is I found a really good deal on an AEM V2 but it says it's for an EX or SI

92 Civic CX Hatch Project: http://www.civic-eg.com/viewtopic.php?t=16256

- Sat Aug 28, 2010 6:01 pm #210971 This is the intake I'm looking at...
http://www.aemintakes.com/search/produc ... d=24-6001C

92 Civic CX Hatch Project: http://www.civic-eg.com/viewtopic.php?t=16256

- Sat Aug 28, 2010 6:21 pm #210972 it should fit

your car is your story, dont let someone else write the book.

91 s10 (sold)
92 civic si with jdm b16a (Sold) http://civic-eg.com/viewtopic.php?t=13460
99 civic lx (current) viewtopic.php?f=63&t=30348

- Sat Aug 28, 2010 6:26 pm #210973 I figured so but wanted to be sure before I paid the money.

92 Civic CX Hatch Project: http://www.civic-eg.com/viewtopic.php?t=16256

- Sat Aug 28, 2010 6:48 pm #210975 I think the only differents, i think is the tb size but all well. I have the short ram intake from my z6 on my b16a all i had to do was cut about 1inch off of it and forced the hose clamp on the tb

your car is your story, dont let someone else write the book.

91 s10 (sold)
92 civic si with jdm b16a (Sold) http://civic-eg.com/viewtopic.php?t=13460
99 civic lx (current) viewtopic.php?f=63&t=30348

- Sat Aug 28, 2010 7:04 pm #210979 is def will fit there might just be an extra port for a hose in the acctual piping!!!! i bought a short ram a while ago for my dx coupe from an ex and it worked fine i just had to get a vaccume cap for the extra port...

Never Say NO To The DOMO!!!!!

- Sat Aug 28, 2010 8:32 pm #210990 Awesome. Thanks! Should be in next week, I'll post some pics.

92 Civic CX Hatch Project: http://www.civic-eg.com/viewtopic.php?t=16256