D15, D16, D17 and Mini-Me swaps
User avatar
By EG_Man
#213880 my engine light is on for the MAP sensor and i was wondering if that effects the engine idle?
User avatar
By 707eg6
#213896 ya if i am right. it should go up and down on ide.
User avatar
By EG_Man
#213933 ohhkay sweet because that should be the last thing i need to get my friken light to go off so i can smog it withought haveing to payy $200 thanx man you helped me out alot
User avatar
By EG_Man
#215409 i changed the sensor and the problem is still there! ahhhh. can anyone tell me what else might be tha problem
By AutoXCivic
#215425 Did you somehow switch the MAP and IACV plugs. I think the have the same pugs and if you switch them it messes things up.
User avatar
By EG_Man
#215506 yah i thought of that buy my friend brought up that i have a intake an there might be an air leak in one of the rubber couplings
User avatar
By suspendedHatch
#215556
EG_Man wrote:yah i thought of that buy my friend brought up that i have a intake an there might be an air leak in one of the rubber couplings


That wont affect your MAP one bit since it measures manifold air pressure. Nothing outside the throttle plate can affect that reading.

If it's not the sensor, then it's the wiring. It's a simple test with a multimeter.