cooling fan help

D15, D16, D17 and Mini-Me swaps
 Reply
User avatar

cooling fan help

By eg84dr
- Thu Feb 10, 2011 4:23 am #237855 so my fan wont kick on and i know the actual fan works
heres my question how can u tell if its the relay or if its the temp sensor that tells the computer to kick the relay over?
in other words how do you tell if the temp sensor is bad or not?
User avatar

By Ajax1989
- Thu Feb 10, 2011 5:27 am #237865 un plug the fan switch(on ur thermostat housing)
and use a jumper wire and jum the harness, and u should hear the relay kick and the fan kick on, if it does kick on, then ur fan switch is bad, 20 buck at vatozone for a lifetime duracrap one
User avatar

By Eg6H2D
- Fri Feb 11, 2011 10:15 pm #238124
94_jdm_ferio wrote:un plug the fan switch(on ur thermostat housing)
and use a jumper wire and jum the harness, and u should hear the relay kick and the fan kick on, if it does kick on, then ur fan switch is bad, 20 buck at vatozone for a lifetime duracrap one


^^ :thumb:

By hondamanky
- Sat Feb 12, 2011 2:45 am #238158
94_jdm_ferio wrote:un plug the fan switch(on ur thermostat housing)
and use a jumper wire and jum the harness, and u should hear the relay kick and the fan kick on, if it does kick on, then ur fan switch is bad, 20 buck at vatozone for a lifetime duracrap one



works every time :thumb: :thumb:
User avatar

By ImThaBean
- Sat Feb 12, 2011 4:30 pm #238204
94_jdm_ferio wrote:un plug the fan switch(on ur thermostat housing)
and use a jumper wire and jum the harness, and u should hear the relay kick and the fan kick on, if it does kick on, then ur fan switch is bad, 20 buck at vatozone for a lifetime duracrap one


Truth spoken here.
 Reply
Return to D Series