Civic-EG.com Forum 3.3.1

- Wed Aug 03, 2011 4:56 pm #266044 I want to buy a new engine for my eg. I have a d15b7. i was wondering wat jdm engine can i use with my factory ecu and wiring harness.

- Wed Aug 03, 2011 5:07 pm #266048 Obd1 Jdm d15b non Vtec ..from What I know

http://civic-eg.com/viewtopic.php?t=17296
My for sale thread check it out!
http://www.civic-eg.com/viewtopic.php?t=25828

#3 CivicEG.com Ferio Squad

- Wed Aug 03, 2011 5:08 pm #266049 Obd1 Jdm d15b non Vtec ..from What I know

http://civic-eg.com/viewtopic.php?t=17296
My for sale thread check it out!
http://www.civic-eg.com/viewtopic.php?t=25828

#3 CivicEG.com Ferio Squad

- Wed Aug 03, 2011 5:09 pm #266050 and non vtec d15 will work the sohc zc non vtec is a d15 really are limited there......

with just your wiring harness you could use and d series i would believe tho i think you would need to modify a little for the dohc zc but anyhow ecu wise you would be holding yourself back alot if you where to get a p28 then you would be able to run practically any d series minus the dohc zc

1980 volvo 242
2001 crv
not using punctuation or good sentence structure since day 1

- Wed Aug 03, 2011 5:53 pm #266053 wat did the p28 come stock in? i know it might be a stupid question.

- Wed Aug 03, 2011 6:30 pm #266056 The P28 came in any D16z6, D16y1, or D16z9. Essentially, the EX/Si trim.
But if you are trying to swap a non-VTEC you won't need it.

- Wed Aug 03, 2011 7:23 pm #266062 so i can swap a jdm non vtec d15 with no wiring harness and ecu problems.

- Thu Aug 04, 2011 12:44 am #266127

so i can swap a jdm non vtec d15 with no wiring harness and ecu problems.

yes.

Coupe Crew #16
DC2: http://www.civic-eg.com/viewtopic.php?t=21051

[Ajax1989]

- Thu Aug 04, 2011 3:57 am #266170

so i can swap a jdm non vtec d15 with no wiring harness and ecu problems.

yes.

this man is correct


but if u bought a p28 and a p06(iirc)
you can run obd1 vtec motors... d16z6, d15b vtecs

your non vtec harness will work.. just gotta run some wires for the vtec

oh and i think u can do b18b/a swaps with ur stock ecu.. and i kno for a fact the harness will work on the b18s

- Fri Aug 05, 2011 12:39 am #266285 yea buddy. thanks for the help. now it makes my decision even harder. ahh the choices.. so many..