Civic-EG.com Forum 3.3.1

- Mon Oct 12, 2015 6:53 pm #356615 Hey guys i have a d15b7 pulley i took of that engine since i swapped in a Z6 i wanted to kno if i can use that one or if the timing marks are the same ? Pls help

[teal_dx]

- Tue Oct 13, 2015 3:33 am #356649 I know for sure they have different OEM Part #'s. I believe both motors are 16 degrees btdc, so I don't see why it wouldn't work.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

[suspendedHatch]

- Wed Oct 14, 2015 4:53 am #356661 The marks will be off. The Z6 is the oddball head. If you swap the cam sprocket, you'll have to compensate for the timing mark difference. Not worth the trouble.

- Wed Oct 14, 2015 4:20 pm #356670

The marks will be off. The Z6 is the oddball head. If you swap the cam sprocket, you'll have to compensate for the timing mark difference. Not worth the trouble.

i just bought a z6 pulley and it was the same marks as my d15 also the TDC mark was aligned with the top cam gear. so is this right ?

[suspendedHatch]

- Sat Oct 17, 2015 3:27 am #356819 You have pics of a D15b7 cam sprocket side by side with a D16z6 sprocket? Post them up.