vtec solenoid?

D15, D16, D17 and Mini-Me swaps
 Reply
User avatar

vtec solenoid?

By blackej2coupe
- Tue Jan 29, 2008 11:31 pm #39937 i just completed my mine me swap , i used a z6 head with my d15b7 bottom end, i seen the problem with not having the 2 plugs long before i completed but i finished everything else and left this to the last. i am missing the 2 plugs that normally plug into the z6 solenoid, can someone tell/ show me a d.i.y how to overcome this, and also would this be the reason my engine managment light is on ?
User avatar

By Greasedmonkey
- Wed Jan 30, 2008 1:15 am #39954 That would be the reason why. You need to find two plugs that will fit those connectors and just run some wires back to the ECU. You will have to pin them into the right spots and I cant remember which those are, but Im sure someone on here knows.
 Reply
Return to D Series