D15, D16, D17 and Mini-Me swaps
User avatar
By CivicEG
#48019 Ok I have a question were does thie hoes go that is in the picture...?
I know that on a D15 its on the TB, but I have a 99 Y8 in there were does this go?

Image[/img]
User avatar
By suspendedHatch
#48041 You will have to get a charcoal canister from a 96+ Civic or Integra. It will slide right into the mount for your old charcoal canister.
User avatar
By suspendedHatch
#48651 No, its a fuel vapor line. On an OBD1 motor there is a port on top of the throttle body. The OBD2 motors have a different purge control setup and don't have this port. So as I said you will need to get a charcoal canister from an OBD2 car, like a 96+ Civic or 96+ Integra.
User avatar
By dionisis
#48666 charcoal canister? u mean Evaporative Emission Control System? first time i hear this on civics! :o
By iownahatchback
#58832 goes to throttle body if you dont have the nipple on the throttle body then you might have a diffrent year throttle body on. i have that disconnetced on mne to but i have a b16 tb its ok if disconnected but not when smog come up
User avatar
By a_CoUpE
#58844 jsut take that shit out lol u dont need it :P
User avatar
By york62
#58931
a_CoUpE wrote:jsut take that shit out lol u dont need it :P


x2
User avatar
By SOHCivegra
#58946 mine has been deleted as well. i've ran it like this through high comp build, nitrous and now a turbo.
delete that shit. cleanse you engine bay