a6 crank in z6 block

D15, D16, D17 and Mini-Me swaps
 Reply
User avatar

a6 crank in z6 block

By marvinp8700
- Wed Oct 15, 2008 3:34 pm #74405 will it work :?
User avatar

By marvinp8700
- Wed Oct 15, 2008 5:00 pm #74420 http://www.knology.net/~jediklc/specs.htm
according to this it should
User avatar

By marvinp8700
- Wed Oct 15, 2008 5:46 pm #74425 honda part numbers for both cranks are the same but the part number for the thrust washers is different
any ifo will help
User avatar

By Classiccarsrule85
- Wed Oct 15, 2008 5:47 pm #74426 yea it should work a buddy of mine has done it but in a different way he used it in a D15 after boring it out and doing work to make it a D16 then threw in the rods and stuff.......

So it should work since his engine ran fine. and according to that chart it should work as well and if you want more id suggest d-series.org since they have pretty much done it all...
User avatar

By d-mon
- Wed Oct 15, 2008 9:11 pm #74460 yes it will, no mods necessary.
oil pump is the same too.
 Reply
Return to D Series