D15, D16, D17 and Mini-Me swaps
By kel
#83390 going to do this swap on my d15b2 if im correct its using the parts from the d15b7 ecu and inlet manifold. any body know of any write ups on how to do this?
By nig90
#83467 I am doing this on my friend's ef. You need to find a si wiring harness from an ef, i think a pm6 ecu. Right now were still in the progress of doing this but, we did a z6 instead. i think all you would need is the wiring and ecu, maybe the dizzy but im not for sure on that. You might need to pin the ecu for the other injectors but im also not for sure on that either. If i find a write up on this i will post a link on here.