Civic-EG.com Forum 3.3.1

[teal_dx]

- Thu Mar 06, 2008 7:33 pm #45196 I had both next to each other and they look pretty similar.
Here's the differences:




Notice the thicker runners on the z6 IM


The D15b7 IM has P06 stamped on the back


The D16z6 IM has P08 stamped on the back


The Z6 IM ports are 42mm at the widest part.


The D15b7 IM ports are 40mm at the widest part.


Both manifolds have a 57mm throttle body opening



There are minor differences in the castings as well.

Now you know what to look for when buying a z6 IM to replace the more restrictive one on your dx/lx/vx/cx, so you won't get scammed

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

[chrono404]

- Thu Mar 06, 2008 7:51 pm #45199 Good info

2017 Chevy BoltEV DD |2001 Honda CRV SE

- Thu Mar 06, 2008 10:29 pm #45230 wow... this is some good information to have... thanks.

R.I.P. Coty "CoCo" Swanson
7-9-91 to 8-16-09
Free Gabe Lorenz!

- Thu Mar 06, 2008 11:13 pm #45244 teal_dx you are the shitsnit.. lol
really great info and saved me from posting this kind of thread..

- Fri Mar 07, 2008 11:32 am #45355 Great review bro.

- Sun Mar 09, 2008 10:24 pm #45595 Good info!

- Mon Mar 10, 2008 12:02 am #45603 great info lol i guess my d16z6 dosnt have a z6 intake mani lol

EJ1 Owner!

- Mon Mar 10, 2008 1:06 am #45605 so i can throw a d16z6 mani on my de15b7?

visit my myspace for awesome hiphop music

http://www.myspace.com/enef

- Mon Mar 10, 2008 1:50 am #45612 got any info on a y8 manifold?


looks good man.

-LowTEC Derbo "the coupe" Build Thread
http://civic-eg.com/viewtopic.php?t=1589
272whp 214wtq

- Mon Mar 10, 2008 2:27 am #45617

so i can throw a d16z6 mani on my de15b7?

sure i wouldnt know why you wouldnt be able to!

[teal_dx]

- Mon Mar 10, 2008 3:45 am #45628

so i can throw a d16z6 mani on my d15b7?

direct swap

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

[teal_dx]

- Mon Mar 10, 2008 3:48 am #45629

got any info on a y8 manifold?

I put a y8 on my d16z6.

The main thing is the IAT sensor is on the intake tube on y8's instead of on the back of the IM like OBD1 IM's. So you will have to extend the wires for the IAT sensor OR drill a hole in your y8 IM.
There are also some extra vac lines that will need to be capped, and if your y8 IM is 99-00 you will have to plug the 4 tiny holes on the flange.

Details on all of the above can be found here:
http://civic-eg.com/viewtopic.php?t=10

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Mon Mar 10, 2008 8:06 pm #45683 so would a d16z6 im increase any hp or air flow?

visit my myspace for awesome hiphop music

http://www.myspace.com/enef

- Mon Mar 10, 2008 8:38 pm #45684 If you do a software tune you may get a few hp...not more then a few...

- Mon Mar 10, 2008 8:52 pm #45687 yea thats what i figured, my p06 is already chipped

visit my myspace for awesome hiphop music

http://www.myspace.com/enef