d16a6 bottom end y8 head
Posted:
Tue Jan 26, 2010 8:29 amby breez
I am gonna be working on a single cam d for an all motor build. Also would like any suggestions on how to make a lil more cr out of a6 bottom end and y8 head ?
I am in the process of rebuilding the block right now. Still looking to get the y8 head .
Posted:
Tue Jan 26, 2010 2:09 pmby teal_dx
If you're looking for high compression D series info, try searching for:
high and compression and d16*
copy/paste just like that
Posted:
Tue Jan 26, 2010 4:11 pmby d-mon
for all motor builds, z6 head > y8 head
you will have to do a lot of porting to get a y8 head to flow as well as a z6 head.
also, the a6 and z6 blocks use the same parts, so if you have trouble finding a part for the a6, look for the z6 equivalent.
Posted:
Tue Jan 26, 2010 6:20 pmby breez
ok z6 head then y8 intake mani is what I will be using.
Wtf is that hole in the back of the a6 head for ??
