d series
Posted: Thu Feb 04, 2010 12:21 amare all d series distributors tha same? because the one for my old d15b7 and the one for my d16z6 look the same to me?
Page 1 of 1
Posted: Thu Feb 04, 2010 12:21 amPosted: Thu Feb 04, 2010 1:01 ami know the plugs are different on certain ones
Posted: Thu Feb 04, 2010 2:09 amno they are not the same.
Posted: Thu Feb 04, 2010 2:10 ami kno on mine they match up....but im tryin to figure out y im gettin the crank sensor check light...car was drivin fine then one day went out the blue went into limp mode....ive posted a few times on here and so far i we narrowed it dow to the distributor,wiring harness itself or the ecu
Posted: Thu Feb 04, 2010 2:16 amd16z6, d16z1, jdm b15b all have the same bolt pattern.
D15b7, d16y7, d16y8 all have the same bolt pattern.
OBD2 and obd1 have different plugs.
The d16y5 is different from all other distributors because of extra electronics on the inside.
So no yours will not bolt up to each other's heads properly, but they will plug in to the harness okay.
D15b7, d16y7, d16y8 all have the same bolt pattern.
OBD2 and obd1 have different plugs.
The d16y5 is different from all other distributors because of extra electronics on the inside.
So no yours will not bolt up to each other's heads properly, but they will plug in to the harness okay.
Posted: Fri Feb 05, 2010 2:38 amteal_dx wrote:The d16y5 is different from all other distributors because of extra electronics on the inside.
Huh?
Posted: Fri Feb 05, 2010 3:49 amThe d16y5 is different from all other distributors because of extra electronics on the inside.
Huh?
x2
what si meant buy this teal
please explain
Huh?
x2
what si meant buy this teal
please explain
Posted: Fri Feb 05, 2010 1:22 pmteal_dx wrote:d16z6, d16z1, jdm b15b all have the same bolt pattern.
D15b7, d16y7, d16y8 all have the same bolt pattern.
OBD2 and obd1 have different plugs.
The d16y5 is different from all other distributors because of extra electronics on the inside.
So no yours will not bolt up to each other's heads properly, but they will plug in to the harness okay.
What he is trying to say was the flux compacitor & the additional ionic neutron copacitors make it different from all the others....
jk I have no idea!
What about the VX distributer to the D16z6??
Posted: Fri Feb 05, 2010 3:45 pmyeah its the flux capasitor 
HAHA
HAHA
thanks
Posted: Sat Feb 06, 2010 1:16 amight that all makes sense...
Posted: Sun Feb 07, 2010 4:33 amto answer the original question, the z6 distributor will 'fit' a b7 head but you will never be able to set the ignition timing because the mounting bolt holes don't allow it to rotate far enough.