Page 1 of 2
d15b question
Posted:
Fri Feb 05, 2010 6:26 pmby nickplus4
hey guys i was brushing the snow off my car today n open the hood to make sure nothing was living in there... i looked at the block to see what d motor was in there the stamp said D15b.. now i have looked around and there are so many differt types of d's.. my question is what one is this?
thanks guy's
Posted:
Fri Feb 05, 2010 7:36 pmby chilango41
If its just d15b. Then you have a jdm engine, pretty gooed one too
Posted:
Fri Feb 05, 2010 7:51 pmby nickplus4
ok thanks now some more questions
1. there is oil every where and i wanna change all the gaskets what do i get..
2.how would this run with a jackson racing super charger running at 5psi i think not 100%
Posted:
Sat Feb 06, 2010 12:11 amby breez
Its a d15b non vtec . Where exactly is it leaking from ?
Posted:
Sat Feb 06, 2010 12:25 amby {ikon}EM1
breez wrote:Its a d15b non vtec . Where exactly is it leaking from ?
d15b theres vtec and a non vtec. 3 kinds of usdm non vtec, and obd2 2stage vtec.obd1 is just like the z6 with a 3mm difference in piston clearence and has more aggressive cam.
Posted:
Sat Feb 06, 2010 12:36 amby breez
{ikon}EM1 wrote:breez wrote:Its a d15b non vtec . Where exactly is it leaking from ?
d15b is the same as the usdm d16z6 it just has more agressive cams... so it has vtec
Yea it is but clearly in his pic the spark plugs are on the intake side of the valve cover soo.. that would make it non vtec. Not to mention there is a non vtec d15b found in 88-95 civics .
Posted:
Sat Feb 06, 2010 1:18 amby nickplus4
from the valve cover i think if you look by the timimg cover you can see the oil
Posted:
Sat Feb 06, 2010 1:29 amby JUICE
nickplus4 wrote:from the valve cover i think if you look by the timimg cover you can see the oil
probably the valve cover gasket....
Posted:
Sat Feb 06, 2010 1:31 amby {ikon}EM1
JUICE wrote:nickplus4 wrote:from the valve cover i think if you look by the timimg cover you can see the oil
probably the valve cover gasket....
x2 much agree
Posted:
Sat Feb 06, 2010 6:11 amby breez
When you change the valve cover gasket be sure to put sealant silicone around the moon shape ends or problem will persist
.
Posted:
Sun Feb 07, 2010 1:38 amby suspendedHatch
Use Honda bond. It's the shiz and it's not expensive.
Posted:
Sun Feb 14, 2010 6:55 pmby nickplus4
Posted:
Sun Feb 14, 2010 11:44 pmby MG6
it looks like the v-tec location?
Posted:
Mon Feb 15, 2010 12:19 amby nickplus4
Ok why would anyone block it off? And what's gonna happen if I put one on?
Posted:
Mon Feb 15, 2010 12:21 amby eg84dr
yup thats where the vtec soleniod would be if u had vtec but you dont soo i have no idea why someone but a blockoff plate there
