Civic EG

right, ive got a 93 lsi d15b2 peice of crap and a D16z6 lump(head,blok,box, ecu, loom,mani's,ect) and i am wondering if there is anything else i need to buy/change/modify/adjust/brake to swap the engines over. will i need sum shit for tha vtec??im rebuilding the engine first but i wanna be prepared coz im on a time limit lol

help would be grately appreciated!

If your car doesnt have vtec already then you will just have to add the vtec wires. Other then that, plug and play with the rest.

chilango41 wrote:If your car doesnt have vtec already then you will just have to add the vtec wires. Other then that, plug and play with the rest.

as above mate, with my last conversion i swapped a full esi dash loom into my car so it was a full plug and play, if yo dont do that you will need to addd the wiring for the vtec solonoid switch etc

if you have an ex engine harness it will plug right in to your 92-95 civic.

He's in the UK and I don't think they had EX's there.

If your current car is fuel injected, then yeah you're fine. If it's carb, then you'll have to convert to EFI. But you said you have the wiring loom so you're all set.

sweet nice 1 lads cheers for tha help will be startin tha swap next week so will probably put sum pics up if i get tha time

Yea give us some pics