Civic-EG.com Forum 3.3.1

- Sat Mar 13, 2010 8:58 am #181017 how much horsepower can make this set up
d16a6 block and crank
d16a1 dome pistons and rods
d16y8 head
y8 intake
i have all the parts for this set up any advice i dont have too much money to spend on after market parts
im using acl racing bearings and rings
thanks for the help

- Sun Mar 14, 2010 2:13 am #181164 anyone

- Sun Mar 14, 2010 2:13 am #181165 double post

- Sun Mar 14, 2010 2:36 am #181170 dyno?

- Mon Mar 15, 2010 1:09 am #181274 you know a good one in las vegas area

- Mon Mar 15, 2010 1:19 am #181279 heres a tunning place in vegas
not sure on hp but that setup will be about 12.2 to 1 for compression ratio wich means you are gonna need a serious tune
http://www.hondoctors.com/

Last edited by eg84dr on Wed Mar 17, 2010 1:09 am, edited 1 time in total.

my build> blue bandit-sold=[
http://civic-eg.com/viewtopic.php?p=203107#203107
taco build!
http://civic-eg.com/viewtopic.php?t=17613

- Tue Mar 16, 2010 3:07 pm #181590 most sohc turbo setups with stock internals max at like 220 to 250whp... so i cant really see a Na setup with stock parts going much past like 150 to 180 whp... but i could be wrong... wouldnt mind to see dyno numbers

94 Civic Hatch turbo b16 (My weekend warrior)
94 Civic Hatch SOHC VTEC ZC (DD) 33+ MPG

PANDA CREW No.20

- Tue Mar 16, 2010 3:28 pm #181594

how much horsepower can make this set up
d16a6 block and crank
d16a1 dome pistons and rods
d16y8 head
y8 intake
i have all the parts for this set up any advice i dont have too much money to spend on after market parts
im using acl racing bearings and rings
thanks for the help

The compression ratio will be somewhere in : 12:1. (if u use Y8-Z6 head gasket)

for power u need a dyno...

- Wed Mar 17, 2010 1:10 am #181702 i wouldnt expect more than 150 wheel horse power
thats what im aiming for with my build

my build> blue bandit-sold=[
http://civic-eg.com/viewtopic.php?p=203107#203107
taco build!
http://civic-eg.com/viewtopic.php?t=17613

- Wed Mar 17, 2010 2:43 am #181730 i think my c/r is 12:61.1 but anyways almos done whit the proyect as soon i have the car runing i go to dyno and post how works
here is a pic is not too god is from my phone

- Sat Mar 20, 2010 7:58 am #182453 i got the car working today runs fine and stong any body in vegas that know tuning place besides hondoctors is cain expencive for me