Page 1 of 1

d16z6 Coil Pack set-up

PostPosted: Sat Mar 20, 2010 1:58 pm
by Eg6H2D
Running a boosted d16z6 soon. on AEM EMS, (suspended hatch), i seen you were running coil packs with you SOHC. now which coil packs were used?.

PostPosted: Sat Mar 20, 2010 5:44 pm
by suspendedHatch
I used CBR motorcycle coils. But I would recommend you use AEM's pencil coils. The pencil coils use standard spark plugs and have wiring documentation. You will also need an ignition module. There is the AEM Twin Fire, and MSD makes one, but there are far far better modules out there. EPM is highly recommended.

The biggest hurdle is getting correct info on how to wire the coils and then how to configure the EMS.

PostPosted: Sat Mar 20, 2010 6:44 pm
by Eg6H2D
Great i will look into all that! Thanks a ton!!

PostPosted: Sat Mar 20, 2010 8:08 pm
by 99cx
i am also interested. when you find out post it up

PostPosted: Mon Mar 22, 2010 6:45 pm
by suspendedHatch
What is there to find out? Call your tuner and tell him what you want. But first call your bank.

Image
Image
Image
Image

$1260 + 333 + 276 + 330 + install and tuning.

PostPosted: Mon Mar 22, 2010 10:21 pm
by Eg6H2D
suspendedHatch wrote:What is there to find out? Call your tuner and tell him what you want. But first call your bank.

Image
Image
Image
Image

$1260 + 333 + 276 + 330 + install and tuning.


LMFAO!! Suspended is a trip!! hahah. yea. that's my lil black box right thereeeee.