ZC pistons in D16a6
Posted:
Mon Apr 26, 2010 5:33 amby TrailerTrash
Would it be safe to assume simply slapping some ZC pistons in a D16a6 would make 12 to 1 compression? or more importantly would it even work? my buddy wants to rebuild the a6 with a slightly built head and put ZC pistons in it and have 12 to 1 compression.
what you guys think?
Posted:
Mon Apr 26, 2010 5:48 amby jerez.com
yes you can put zc pistons on a6 block
im runing thee same set up with y8 head no problems at all
you need good tuning and 91 octane gas
Posted:
Mon Apr 26, 2010 5:50 amby chrono404
http://www.zealautowerks.com/dseries.html
This is a compression calc so you see what your compression will be with different piston/head combos. Pretty cool. Should be useful.
Posted:
Mon Apr 26, 2010 7:43 amby AutoXCivic
chrono404 wrote:http://www.zealautowerks.com/dseries.html
This is a compression calc so you see what your compression will be with different piston/head combos. Pretty cool. Should be useful.
It also tells you if the pistons will be above or below the deck ... which is also nice.
Posted:
Mon Apr 26, 2010 8:57 pmby eghatch21
i have a d15 block wit a y8 head n i wanna run p29 pistons so those pistons wont hit the valves in the head n ruin them?
Posted:
Tue Apr 27, 2010 1:29 pmby forcefedEG
eghatch21 wrote:i have a d15 block wit a y8 head n i wanna run p29 pistons so those pistons wont hit the valves in the head n ruin them?
dont threadjack start your own thered
