Civic EG

I got Flash code 36 What that mean

ECU is chipped By Ebay

D16A6/Z6 Mini Me

http://civic-eg.com/viewtopic.php?t=1558

traction control found on JDM ecu's

WTF traction control

How eliminate this code, change chip?

Yeah it will need to be programmed with whatever software was used by the ebay seller.

I wouldn't think that code would make your car run in limp mode though.



It's been said on here a lot and it's worth saying again... Do not buy "ebay" chips for your ecu. Your ecu controls your fuel, engine, and every dollar you have invested into it. ECU is the last place you want to try to go cheap on.

Your ecu should be individually fine tuned to match the engine & mods done to your car.

Figure out who will be professionally tuning your car first. A local dyno is a good place to start.

If you live too far, ask around the community to see who can do a good street tune.

Ask your tuner what software they are comfortable tuning. Don't be surprised if you drop $600 for S300 and then a couple more hundred for dyno time. Crome & Neptune & eCtune are cheaper tuning options, AEM is much more expensive.

Better reliable software will usually save you time on the dyno and help your engine run more safely in the long run.

I take Chipp out form ECU.

Now I have Issue with my daily EH9 civic Code 43 "Fuel supply system" Starts do when drive over 40km strait, when start again engine light is off.

maybe the fuel filter is clogged or an injector is dirty? Strange that this would only start after you took the chip out of the ECU...

Is 2 different Cars, one is Mini Me and another Stock 1.6 Sohc Vtec sedan what have code 43