Civic EG

Posted: **Fri Jul 02, 2010 7:02 pm**

what do i do about the coolant holes in the mani's? Im putting the y8 on the z6 head an i dont know what the do since the holes are different. Y8 top, z6 bottom.

Posted: **Fri Jul 02, 2010 7:38 pm**

96-98 will. 99-00 will also but has air injection stuff to block off.
use a one for manual, for the 2 wire iacv
also you will have to relocate your iat

Posted: **Sat Jul 03, 2010 2:12 pm**

What do i do about the coolant holes? or does it not matter that they dont match, just line up?

Posted: **Sat Jul 03, 2010 3:46 pm**

they still like up, so it will be okay. Just be sure to use the IM gasket made for your valve cover, not your head. :thumb:

And be sure to fill the 4 small air injection holes if it is from a 99-00 :thumb:

Posted: **Sat Jul 03, 2010 4:04 pm**

So the y8 gasket not the z6. rit

Posted: **Sat Jul 03, 2010 4:29 pm**

yep, and be sure the y8 IM gasket is the correct year :thumb:

Posted: **Sun Jul 04, 2010 12:39 am**

Thanks a lot. :thumb:

Posted: **Sun Jul 04, 2010 11:00 pm**

teal_dx wrote:Just be sure to use the IM gasket made for your valve cover, not your head.

Did you start your 4th of July drinking already? :lol:

Posted: **Tue Jul 06, 2010 2:22 am**

suspendedHatch wrote:
teal_dx wrote:Just be sure to use the IM gasket made for your valve cover, not your head.

Did you start your 4th of July drinking already?

Wow I butchered that, glad someone payed attention :thumb:

try #2:
Just be sure to use the IM gasket made for your IM, not your head. :thumb:

Posted: **Tue Jul 06, 2010 5:47 am**

It actually took me awhile till i knew what you ment. :lol:

Its all good, meth isnt for everyone. Just playing.

Posted: **Wed Jul 07, 2010 4:39 pm**

berg89 wrote:Its all good, meth isnt for everyone. Just playing.

Good to know I'm not the only one going senile. In another thread I just caught myself writing "vacuum lines" instead of "AC lines". :roll:

Civic EG

y8 mani on z6 head

y8 mani on z6 head