Civic EG

Posted: **Fri Jul 30, 2010 5:23 pm**

will it go right in and plug evry fing back in from the d15b7. ? and how would i do the vtec some 1 said are cars kinda came with it all ready is it just plug it in and play ? need full help on the swap

Posted: **Fri Jul 30, 2010 6:00 pm**

92 hatches are pre-wired for vtec up to the shock tower harness.

http://civic-eg.com/viewtopic.php?t=1474
Here's the DIY list, click the Mini-Me link 4th down from the top.
There's detail in there on how to run the wiring for the vtec head :thumb:

The rest is plug & play for the most part.

Posted: **Fri Jul 30, 2010 6:20 pm**

no mines a 95 ej2 coupe and a guy said i will have to wire up the other ecu and to me the wireing part just sounds hard unless theres a hole walk through of it all

Posted: **Fri Jul 30, 2010 6:56 pm**

Just drop the motor in, wire vtec http://www.honda-tech.com/showthread.php?t=2414079 plug everything else in and your ready to go. Nothing hard :thumb:

Posted: **Fri Jul 30, 2010 7:05 pm**

I did this swap in like 1 day, it was my first swap too. Its a good start to learn and feel proud of your self

Posted: **Fri Jul 30, 2010 7:27 pm**

ok cool thx

Posted: **Sat Jul 31, 2010 1:52 pm**

1 more thing can i use my gear box or will i need to use the d16z6 box ?

Posted: **Sat Jul 31, 2010 2:21 pm**

you can use your b7 gear box but the z6 tranny is wayy better. the gear ratio is much shorter and provides much better acceleration.

Posted: **Sat Jul 31, 2010 11:06 pm**

sweet thanks guys

Civic EG

noob to swap . what will i need for d16z6 swap from d15b7

noob to swap . what will i need for d16z6 swap from d15b7