Civic EG

i was gonna get an msd cap and rotor for my distrib with an external coil i just want to make sure i can run this setup without the msd ignition box????
if i can run it without it how do i hook up the coil????

no you do not need an ignition box. you take the stock cap off and pull the coil out then wire the MSD coil in and run the wires somewhere in the engine bay and mount the coilpack. all there is too it

Yes you can do that with an external coil such as the blaster2, but I would put the money elsewhere. Unless you need to replace defective oem parts, keep your stock ignition. It's good enough for most street driven cars.

yea i was having an issue with missfiring and just wanted to upgrade their also fairly cheap on ebay so i dont mind....where do i wire the coil to

nvm i ddint read it fully im half asleep its 1213 in new york