Civic EG

ok i have that famous oil leak that leaks onto the trans and the front of the block where the engine stamp it..

my question is does anyone know where the eff is it coming from
i replace the dizzy with a new seal back in march or april and it didnt stop the leak..

its really pissin me off, so does anyone know where it could be coming from

thanks
-AJ

In for an answer, I've got it too ... now that I'm boosted.

good to know im not the only one

I have it too, and i'm guessing for it me, its coming from under my valve cover.

Guys guys guys!!! had it too i fixed it. Check and seal your ECT sensor. and also reseal snout where the top radiator hose goes on to. Honda bond or high temp grey permatex sealant for the snout.

and if you can post up a pic to see how bad it is..

why would the ect leak oil??

and ill try to get a new dizzy seal
but the dizzy i got back in may had a new seal and it didnt stop the leak

and id take a pic but i pressure washed my engine last week and also today..

94_jdm_ferio wrote:why would the ect leak oil??

and ill try to get a new dizzy seal
but the dizzy i got back in may had a new seal and it didnt stop the leak

and id take a pic but i pressure washed my engine last week and also today..

Coolant once it sits on the hot motor get's stuck on there and picks up dirt while your driving make sure it aint leaking from there. right next to that inder the dizzy there is a tiny plug. I believe oil comes out of there when you take it out. I believe it;s the oul pressure sending unit along witht eh one on top of the oil filter..

EG6b20R wrote:

94_jdm_ferio wrote:why would the ect leak oil??

and ill try to get a new dizzy seal
but the dizzy i got back in may had a new seal and it didnt stop the leak

and id take a pic but i pressure washed my engine last week and also today..

Coolant once it sits on the hot motor get's stuck on there and picks up dirt while your driving make sure it aint leaking from there. right next to that inder the dizzy there is a tiny plug. I believe oil comes out of there when you take it out. I believe it;s the oul pressure sending unit along witht eh one on top of the oil filter..

oh ok i was likt how does a coolent sensor leak oil lol
but yea im thinkin its my oil pressure sensor, i have an extra one from my old head..

so im gonna replace that seal again and replace that sensor
now is there anyrhing i can put on the threads like plumer tape on there to help stop oil from leaking.. and yes i know not to use plumer tape, i was only using that for an example

id use the honda bond because it's high heat. or high heat silicone sealant. make sure you only put it on the end closest to you when your screwing it in. dont want sealant floating around where it isnt supposed to.