Civic EG

ok so i picked up a dual core aluminum radiator to cool down my d15b vtec..i also got a slim fan because they have more clearance than the stock fan.. so ive noticed even with the aluminum dual core radiator the slim fan isnt cooling the motor as good as my stock radiator and stock fan did..i put my stock fan back on and seems to cool better but i was wondering if i could mount the slim fan on the front side of the radiator for dual cooling? if so how would i wire it so it will pull air or push the air??

just reverse the wires.

if you do that make it a pusher.

yeah i was also wondering how i would wire the fan to push the air?? will it redtrict any airflow being that its going to be mounted in front of the radiator?

Like previously stated, just reverse the wires and it will reverse the flow. I would think in theory that having that having that fan in front of the radiator would restrict your flow of air when its not on.

its not gunna increase airflow.

tealEG wrote:ok so i picked up a dual core aluminum radiator to cool down my d15b vtec..i also got a slim fan because they have more clearance than the stock fan.. so ive noticed even with the aluminum dual core radiator the slim fan isnt cooling the motor as good as my stock radiator and stock fan did..i put my stock fan back on and seems to cool better but i was wondering if i could mount the slim fan on the front side of the radiator for dual cooling? if so how would i wire it so it will pull air or push the air??

jsut put the stock fan on and hook it up right

the fan should only come on under 30ish mph
after that the wind flow is good enough

did u ever replace ur fan switch?