Page 1 of 1
need the right ecu for my d series need help
Posted:
Sun May 29, 2011 6:05 pmby undeadone069
i know i need a p28 from what everyone says. but how do i tell that it is for a automatic car. the guy i bought the first one from sold me a non v tec for a y7. i dont want to get fucked over i got to go up there and swap it and its like a hour and a half ride.
Posted:
Mon May 30, 2011 1:47 amby undeadone069
also i noticed when i hit about 80 that i can feel like a hard pulsing vibration in the steering wheel. any ideas?
Posted:
Mon May 30, 2011 2:22 amby 92civic_vx
look at the ecu number, if it is an auto ecu it will say p28-a5x .... (x=any number) if it is a 5 speed ecu it will say p28-a0x... as far as the vibration in steering wheel first check the balance on your tires.
Posted:
Mon May 30, 2011 3:53 amby Ajax1989
^ he is correct on the ecu
but the vib can be from unbalanced tires, bubbled or abnormally worn tires, loose lug nuts, wrapped rotors, to name some of the most common
Posted:
Mon May 30, 2011 4:04 amby undeadone069
ty both very much
Posted:
Mon May 30, 2011 4:10 amby Ajax1989
No problamo
Posted:
Mon May 30, 2011 5:32 amby undeadone069
will get wheels checked asap and look at rotors and brakes
Posted:
Mon May 30, 2011 12:06 pmby 92civic_vx
warped rotors you would feel when braking mostly. a seperated belt in the tire would be felt at low speeds as well. highway speed vibration is usually balance or bent wheels.