Civic EG

Posted: **Wed Aug 03, 2011 4:56 pm**

I want to buy a new engine for my eg. I have a d15b7. i was wondering wat jdm engine can i use with my factory ecu and wiring harness.

Posted: **Wed Aug 03, 2011 5:07 pm**

Obd1 Jdm d15b non Vtec ..from What I know

Posted: **Wed Aug 03, 2011 5:08 pm**

Obd1 Jdm d15b non Vtec ..from What I know

Posted: **Wed Aug 03, 2011 5:09 pm**

and non vtec d15 will work the sohc zc non vtec is a d15 really are limited there......

with just your wiring harness you could use and d series i would believe tho i think you would need to modify a little for the dohc zc but anyhow ecu wise you would be holding yourself back alot if you where to get a p28 then you would be able to run practically any d series minus the dohc zc

Posted: **Wed Aug 03, 2011 5:53 pm**

wat did the p28 come stock in? i know it might be a stupid question.

Posted: **Wed Aug 03, 2011 6:30 pm**

The P28 came in any D16z6, D16y1, or D16z9. Essentially, the EX/Si trim.
But if you are trying to swap a non-VTEC you won't need it.

Posted: **Wed Aug 03, 2011 7:23 pm**

so i can swap a jdm non vtec d15 with no wiring harness and ecu problems.

Posted: **Thu Aug 04, 2011 12:44 am**

shadowsalinas86 wrote:so i can swap a jdm non vtec d15 with no wiring harness and ecu problems.

yes.

Posted: **Thu Aug 04, 2011 3:57 am**

RWMIII wrote:
shadowsalinas86 wrote:so i can swap a jdm non vtec d15 with no wiring harness and ecu problems.

yes.

this man is correct

but if u bought a p28 and a p06(iirc)
you can run obd1 vtec motors... d16z6, d15b vtecs

your non vtec harness will work.. just gotta run some wires for the vtec

oh and i think u can do b18b/a swaps with ur stock ecu.. and i kno for a fact the harness will work on the b18s

Posted: **Fri Aug 05, 2011 12:39 am**

yea buddy. thanks for the help. now it makes my decision even harder. ahh the choices.. so many..

Civic EG

jdm engine question

jdm engine question