d16y8 intake manifold, on d15b7?

D15, D16, D17 and Mini-Me swaps
 Reply
User avatar

By d-mon
- Wed Sep 21, 2011 8:06 pm #273472 yes.
get one from a manual, it has a 2 wire iacv.
and you need to drill a hole for the iat
User avatar

By teal_dx
- Wed Sep 21, 2011 8:28 pm #273482 I've also heard you can mount the IACV on the intake tube, before the throttle body. I mounted mine in the back of the runner where it was on my b7 intake mani and it's never been a problem :thumb:
User avatar

By teal_dx
- Wed Sep 21, 2011 8:29 pm #273483 Also if your y8 Intake manifold is 99-00, you'll need to block off the holes for the cold start assist.
I did this in my mini-me swap: http://www.civic-eg.com/viewtopic.php?t=10
User avatar

By eg-guy
- Thu Sep 22, 2011 12:16 am #273536 ^^awesome, thanks guys for the quick response. Im picking this up asap.
User avatar

By Wicked
- Thu Sep 22, 2011 5:14 am #273627 I coulda sworn youd need to get the head ported to reap any real benefits from a bigger manifold on a smaller manifold head, As your just gonna end up being limited by the heads intake ports either way.
User avatar

By TrailerTrash
- Mon Dec 05, 2011 4:42 am #284168
Godspeed_eg8 wrote:will any hp be gained from this ?


you might gain a few ponies but it aint gunne turn your D into a neck breaker. however it is a cheap upgrade for a turbo car :thumb:
 Reply
Return to D Series