Page 1 of 1
d16z6 on engine stand pic request

Posted:
Fri Nov 23, 2007 6:20 pm
by hondajunkee
im picking up a d16z6 tomorrow and i was wondering if anyone had pictures of a d series on an engine stand. im trying to figure where to mount it and i really dont want to break anything. also which bolts did you use? Thanks guys

Posted:
Fri Nov 23, 2007 7:32 pm
by ChicagoMike
As for the bolts, you go to the local hardware store and get bolts that are about 1/2" longer than your transmission bolts.......but they have to be the same thread pitch as your tranny bolts. Its probably a good idea to pick up some washers too, just in case you have to make adjustments.
And here's your pic on how/where to mount it.


Posted:
Fri Nov 23, 2007 7:36 pm
by hondajunkee
cool thanks man that helps a ton, do you happen to know the thread size of the tranny bolts?

Posted:
Fri Nov 23, 2007 7:37 pm
by ChicagoMike
Off the top of my head, no..........but I'll see if I can find it for ya.

Posted:
Fri Nov 23, 2007 7:41 pm
by ChicagoMike
Everything I've come across says this.....
M12X1.25mm

Posted:
Sat Jan 12, 2008 7:36 am
by JDM FERIO MAN
by my sohc vtec head $300 all new sh1t

Posted:
Thu Mar 27, 2008 12:44 am
by LSR

Posted:
Thu Mar 27, 2008 1:53 pm
by -EJ1- COUPE
this is my motor i just used the tranny bolts through the stand


Posted:
Mon Jan 12, 2009 4:29 am
by Classiccarsrule85
i know this is sorta old n stuff but the bolts i use are the upper trans mount and motor moutn bolts they thread perfectly in 17mm head n for mine i had to use a couple of washers but it beat trying to find the stuff at the store just thought id mention this

Posted:
Wed Jan 14, 2009 6:23 am
by biretsu89
All I used was 3 of the trans bolts... i didnt even bolt the thing 100 percent of the way and it was still good

.. it is only a honda motor.... not that heavy for a
motor

Posted:
Mon Jan 19, 2009 5:18 pm
by coeg
Yeah there really not that heavy at all.

Posted:
Tue Jan 20, 2009 8:41 pm
by CivicEG
-EJ1- COUPE wrote:this is my motor i just used the tranny bolts through the stand

Sexy engine

Posted:
Wed Jan 21, 2009 12:09 am
by Sentry
coeg wrote:Yeah there really not that heavy at all.
Engine + Trans combined in my old Metro was something like 140 lbs.
