d16z6 crank pully
Posted:
Sun Mar 11, 2012 6:31 amby 95cpeEX
so i had this weird noise coming from my engine today, found out that my crank pully bolt was starting to back out. i tightened it down enough to get back to my place to use my impact gun on it. and when i did that i noticed that its missing a chunk for power steering belt part, its like a piece broke off. but now heres my question, where is a good place to order a new pully, bolt and key thing? the local autozone wants $140 bucks for factory, figure i should be able to pick up something aftermarket for around that or cheaper
Posted:
Sun Mar 11, 2012 4:11 pmby teal_dx
I'd look for a used pulley and then get a new bolt & ket from the dealership, if you don't want to re-use your old bolt & key.
Posted:
Sun Mar 11, 2012 4:31 pmby TrailerTrash
teal_dx wrote:I'd look for a used pulley and then get a new bolt & ket from the dealership, if you don't want to re-use your old bolt & key.
this.
go to a junkyard and get the pulley or get one from craigslist
Posted:
Sun Mar 11, 2012 7:10 pmby 95cpeEX
teal_dx wrote:I'd look for a used pulley and then get a new bolt & ket from the dealership, if you don't want to re-use your old bolt & key.
i just wasnt sure if there some where online that i could order an aftermarket one that lighter or somthing
Posted:
Mon Mar 12, 2012 3:39 amby TrailerTrash
95cpeEX wrote:teal_dx wrote:I'd look for a used pulley and then get a new bolt & ket from the dealership, if you don't want to re-use your old bolt & key.
i just wasnt sure if there some where online that i could order an aftermarket one that lighter or somthing
you want a lighter pulley?
http://www.cimotorsports.net/motor-spor ... d16z6.html
Posted:
Mon Mar 12, 2012 1:11 pmby teal_dx
I have a lightweight crank pulley for sale - cheap:
http://civic-eg.com/viewtopic.php?t=6177
Posted:
Tue Mar 13, 2012 1:17 amby EG Love
What a very interesting upgrade.. I heard nothing compares to Honda's OEM crank pulley, OEM or bust? Or is it a practical upgrade?