Page 1 of 1
What's next ..help??
Posted:
Thu Mar 29, 2012 1:27 pmby STOCK4DR
So I just got done with my last project it included a6 cam and valve springs y8 cam gear port and polished intake mani (z6) b18 tb and mani is port matched to tb with a fresh tune up .... Along with this I already had misimoto intake header and exhaust ....so my question is whats next ....is there any injector fuel pump comb that will compliment this set up or what other bolt ons to do . I am familiar with ex trans and plan on doin that as well but what mods as far as motor goes
Posted:
Tue Apr 03, 2012 8:41 pmby STOCK4DR
Any suggestions
Posted:
Tue Apr 03, 2012 8:47 pmby dbrooks
Maybe get a header if you don't have on already.
I'd probably get a EX/Si transmission, as well.
Posted:
Wed Apr 04, 2012 2:07 amby teal_dx
The transmission will make a huge difference. You don't need bigger injectors or higher rate fuel pump with the mods you have.
Posted:
Wed Apr 04, 2012 3:24 amby TrailerTrash
lightweight flywheel
Posted:
Fri Apr 06, 2012 2:27 pmby STOCK4DR
so looks like i gotta save my pennies and get ex trans with lightweight flywhell and a good clutch ..thanx guys