Civic-EG.com Forum 3.3.1

- Wed Jul 18, 2012 4:28 am #311315 sup , im working on my d16z6 swap, and notice another problem
im removing this engine from a 94 ex coupe, and im planning on putting my d15b8 back into the ex, but they have different crank pulleys.

my question is can i swap the pulley, with no problems in the future.

i dont have power steering in my cx and dont need it

but the ex does and i dont what it leaking.

thankz

My Slow Project
http://civic-eg.com/viewtopic.php?t=9563

[teal_dx]

- Wed Jul 18, 2012 1:20 pm #311356 Yeah you can swap them over between those 2 motors

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Thu Jul 19, 2012 2:43 am #311465

Yeah you can swap them over between those 2 motors

nice, but is it safe,

My Slow Project
http://civic-eg.com/viewtopic.php?t=9563

- Mon Jul 23, 2012 1:17 am #311659 i just did cause i didnt have a z6 pulley but its running good so far (keeps fingers crossed)

- Mon Jul 23, 2012 1:26 am #311660

i just did cause i didnt have a z6 pulley but its running good so far (keeps fingers crossed)

i'm using the d15b8 pulley is that what you use on your d16z6?

My Slow Project
http://civic-eg.com/viewtopic.php?t=9563