d16w3

D15, D16, D17 and Mini-Me swaps
 Reply

d16w3

By k_asars
- Sat Oct 20, 2012 1:15 pm #318261 what ecu uses d16w3 engine, and what OBD?
and can I put b7 or z6 intake mani on this engine?
User avatar

By teal_dx
- Sat Oct 20, 2012 2:21 pm #318264 from Wikipedia:
D16W3
non-VTEC
Found in:
1998–2001 Honda Civic Aerodeck MC1 1.6i LS/SR
Bore and Stroke: see D16 Series Engines
Displacement: see D16 Series Engines
Power : 116 hp (85 kW)
Valvetrain : SOHC (4 valves per cylinder)


So you have an OBD2 motor. Are you putting this into an OBD1 car? D15b7 or D16z6 intake manifold will work :thumb: All SOHC D series manifolds will interchange.

.

By k_asars
- Sat Oct 20, 2012 4:29 pm #318271 I have civic aerodeck, but that intake mani looks like a joke, looks like some kind of plastic. :D and maybe with bigger mani it would go better.
is there difference between obd1 and obd2 engine harness, is all conectors for mani will fit?
User avatar

By teal_dx
- Sat Oct 20, 2012 8:51 pm #318282 Yes there is a difference in OBD1 and OBD2 harnesses. They are not compatible when it comes to OBD1 and OBD2 civics because of the design & position of the plugs on the harness. I would go with an intake manifold from the D16y8 motor. It is OBD2 so it will have the proper sensors for your OBD2 civic and it is also a very good flowing intake. :thumb:

.

By k_asars
- Sun Oct 21, 2012 6:16 am #318318 ok thanks for help.

.

By k_asars
- Sun Oct 21, 2012 6:22 am #318319 then maybe I can put y8 head on my w3 block?
 Reply
Return to D Series