Page 1 of 2

D16Z6 Oil Leak; Help??

PostPosted: Mon Nov 26, 2012 8:30 pm
by KittyrdzEG9
Hello everyone!

Ok, i need help from somebody, inside my car theres a D16Z6 stock. Since I brought the car I notice a small leak of oil coming from the valve cover, so recently I change the Valve cover gasket, It still leaked. I change the Distributor gasket... Still leak :x What It could be?? we checked the valve cover gasket and put silicone around the corners and everything but I still dont understand where the leak its coming from! :evil:

PostPosted: Mon Nov 26, 2012 8:36 pm
by Punksz6
Do you have any pics to post? Where is it leaking exactly? Did you check your Vtec Solenoid?

PostPosted: Mon Nov 26, 2012 8:39 pm
by KittyrdzEG9
Punksz6 wrote:Do you have any pics to post? Where is it leaking exactly? Did you check your Vtec Solenoid?


I was thinking about it, but i havent checked it. But ill go now and take one and post it quick.

PostPosted: Mon Nov 26, 2012 9:04 pm
by KittyrdzEG9
So this is the pics I just took;

Image

Image

This photo its a bit blurry but its kind of on the bottom of the vtec solenoid
it was wet

Image

Dry Valve cover

Image

Image

Image

PostPosted: Mon Nov 26, 2012 9:24 pm
by teal_dx
Looks like the solenoid is leaking to me :thumb:

PostPosted: Mon Nov 26, 2012 9:47 pm
by KittyrdzEG9
teal_dx wrote:Looks like the solenoid is leaking to me :thumb:


So I have to replace it or it just another gasket?

PostPosted: Mon Nov 26, 2012 9:48 pm
by teal_dx
Just the gasket.

PostPosted: Mon Nov 26, 2012 10:26 pm
by EJ1_MK
Looks like the Disturtor O-Ring to me, that is one of the most common problems. They are cheap from honda, and do get any and all gaskets from honda.

PostPosted: Mon Nov 26, 2012 10:35 pm
by KittyrdzEG9
EJ1_MK wrote:Looks like the Disturtor O-Ring to me, that is one of the most common problems. They are cheap from honda, and do get any and all gaskets from honda.


I changed it already; I brought it for $4 two weeks ago =/

PostPosted: Mon Nov 26, 2012 10:36 pm
by KittyrdzEG9
teal_dx wrote:Just the gasket.


Thank you :thumb:

Im gonna try to change it this weekend!

PostPosted: Tue Nov 27, 2012 5:36 pm
by Punksz6
It kinda does look like it could be the Dizzy O-ring but remember thats not the only place it will leak from the dizzy. It has an inner ring aswell. First try the vtec solenoid. It could leak on one side and the oil is dripping twowards the front of the car. Do you park on a slant?

PostPosted: Tue Nov 27, 2012 6:01 pm
by EJ1_MK
KittyrdzEG9 wrote:
EJ1_MK wrote:Looks like the Disturtor O-Ring to me, that is one of the most common problems. They are cheap from honda, and do get any and all gaskets from honda.


I changed it already; I brought it for $4 two weeks ago =/


Might try to use some simple green and clean the top of the trans off and around any where that has oil and then check back in a day after driving it and see if you can locate where it is coming from.

PostPosted: Tue Nov 27, 2012 7:59 pm
by KittyrdzEG9
EJ1_MK wrote:
KittyrdzEG9 wrote:
EJ1_MK wrote:Looks like the Disturtor O-Ring to me, that is one of the most common problems. They are cheap from honda, and do get any and all gaskets from honda.


I changed it already; I brought it for $4 two weeks ago =/


Might try to use some simple green and clean the top of the trans off and around any where that has oil and then check back in a day after driving it and see if you can locate where it is coming from.


I pressure wash it before this pictures, drove it during the day and yesterday I checked it and thats the leak I found; If its the O ring maybe the person I paid didnt put it right (I dont know how to do it) I did the valve cover my self.

PostPosted: Tue Nov 27, 2012 8:20 pm
by EJ1_MK
its really easy to do but if the VTEC solenoid was leaking it wouldn't be dripping down the front of the trans case. You just pull the Dizzy off and you will see the o-ring on it.

PostPosted: Tue Nov 27, 2012 8:37 pm
by KittyrdzEG9
EJ1_MK wrote:its really easy to do but if the VTEC solenoid was leaking it wouldn't be dripping down the front of the trans case. You just pull the Dizzy off and you will see the o-ring on it.


Thank you; I have to wait till tomorrow but Ill update everybody tomorrow and check that out! :thumb: :thumb: