Cylinder head
Posted: Sat Mar 16, 2013 9:05 pmWhat other heads fit on a d16z6 ?
Page 1 of 1
Posted: Sat Mar 16, 2013 9:05 pmPosted: Sun Mar 17, 2013 1:15 amD16a6, D16y7, D16y8, D15z1, D16y5... probably D17 heads too.
Posted: Sun Mar 17, 2013 1:33 amjdm d15b would be a nice upgrade 
Posted: Mon Mar 18, 2013 11:32 pmteal_dx wrote:D16a6,
where you gonna put the oil jet, brah?
stubrun wrote:jdm d15b would be a nice upgrade
lol, no.
they are the same(obd1).
Posted: Tue Mar 19, 2013 12:23 ami thought the d15b cam was a tad more aggressive than a z6
Posted: Tue Mar 19, 2013 3:12 amstubrun wrote:i thought the d15b cam was a tad more aggressive than a z6
it is.
Posted: Tue Mar 19, 2013 6:23 pmthey are both obd1 vtec heads, but remember z6 is 1.6 and d15b vtec is 1.5, as well as the cam being different.
Posted: Tue Mar 19, 2013 8:43 pmok d16 head with d15b cam
Posted: Wed Mar 20, 2013 7:47 pmTrailerTrash wrote:stubrun wrote:i thought the d15b cam was a tad more aggressive than a z6
it is.
after measuring both... NO.
i attribute the .0001whp increase from the p08's tune, not the identical cam.
btw, santa clause isn't real either. sorry.
Posted: Sun Apr 07, 2013 3:29 pmI just got one piece of the rocker arm that was broken on mine from another d16 , but it's not running like before . Runs good when u drive but when it idles its ruff shakes, which it didn't do before.. What has to be adjusted?
Posted: Sun Apr 07, 2013 4:32 pmSounds like you need to adjust the valves. They are supposed to be adjusted everytime the rocker arm assembly is removed
Posted: Mon Apr 08, 2013 1:54 pmAlright just youtubed it, where can I get the Gages to adjust the valve
Posted: Mon Apr 08, 2013 1:57 pmAny local auto parts store usually will have them