Radiator and Colling
Posted:
Sun Jun 29, 2008 10:11 pmby Duggy
Well my radiator has got a kinda major leak and I'm putting water in everytime I drive the car at the moment so I'm going to replace the radiator.
I decided that while I upgrade the rad, I'll upgrade the rest of the colling system, eg, fan/hoses/thermoswitch/thermostat.
My question is this, is there much of a difference between the radiator for a B series and a D series??
Posted:
Tue Jul 15, 2008 3:41 pmby hannibalhekki
yes the d series radiator for our cars are half size. the ones for the b series are thicker and full size radiator, i suggest getting a mishimoto dual core radiator with silicone hoses. i got one not too long ago, and have been so much happier with the setup! the hoses cost me $80 and the radiator i bought off a friend for $100
4
Posted:
Mon Jul 28, 2008 1:01 pmby uvwx693
I ran into this article doing some unrelated research. I was [amazed, astounded, frightened, disgusted] that this cult and it's charismatic leader has so much power.
Ipod Videos have so much influence. And they routinely brainwash people. Think mass weddings. Think Messianic delusions.
Posted:
Mon Jul 28, 2008 4:50 pmby Greasedmonkey
Actually, the Hatches that came stock with B series motors still use the half size radiator. They just have bigger hoses. The full size radiators are in the integras.