D15, D16, D17 and Mini-Me swaps
User avatar
By Jadori
#62620 ok at idle my car putters..the rpms go up and down just alittle..one or two rpms....but when you listen to the exhaust it has a putter(mind you it has no cat or resonators)..it was like that when i bought it its a d16a6 block and a vtec head..help..thanks
User avatar
By suspendedHatch
#62694 What RPM does it idle at? You can't rely on the factory tach. You need to hook up a diagnostic tach and the plug connector on the strut tower.

Ignition timing. Idle control screw (both should be checked adjusted according to the shop manual). Verify you have the correct cam gear for the head. Verify cam timing.
User avatar
By Jadori
#62731 ok ill take care of that!....the guy hooked up a aftermarket tach...but ill look into that stuff
User avatar
By id3379
#62909 clean your IACV
User avatar
By Jadori
#62922 i will clean that this weekend...thanks :P
User avatar
By id3379
#62989 welcome!
User avatar
By Jadori
#69965 well i cleaned all my sensors and cleaned the iacv and it still has the same problem...help!!!
User avatar
By Jadori
#69968 also a screw is stripped on the tps so the tps moves around alittle
User avatar
By d16drey
#70593 have your tps adjust and also clean up your TB :)
User avatar
By Jadori
#70935 ok ill try that..and see how that goes....
User avatar
By Classiccarsrule85
#70956 did you bleed the coolant andpurge it of air bubbles this could also cause idle to not work correctly....
User avatar
By Jadori
#71033 no sir i havent but thanks ill do that also