Page 1 of 1

D15b Prices ?

PostPosted: Tue Aug 19, 2008 6:21 pm
by id3379
For those of you who have bought D15b Swaps, what are some of the prices you guys have been getting ? I'm planning on going through Hmotors

http://www.hmotorsonline.com/shop/sc200 ... item=30021

They want $900 For a complete-ish swap.

PostPosted: Tue Aug 19, 2008 6:30 pm
by Faded_Milano
does that include axles?

PostPosted: Tue Aug 19, 2008 6:34 pm
by id3379
Faded_Milano wrote:does that include axles?


Don't think so, but i already have D-series axles.

PostPosted: Tue Aug 19, 2008 6:45 pm
by Faded_Milano
does it need 93 octane with a 9.6:1 compression ratio? I want one too.

PostPosted: Tue Aug 19, 2008 7:33 pm
by Gorveatt
What happened to your B20?

PostPosted: Tue Aug 19, 2008 11:38 pm
by Greasedmonkey
Gorveatt wrote:What happened to your B20?


indeed.

PostPosted: Wed Aug 20, 2008 6:57 am
by id3379
Gorveatt wrote:What happened to your B20?


oh i still have it, and its wonderful idle problems, but my friends D15b beats my b20 :-\

im gunna be getting a EF for like $500 as another project car so i wanna do a turbo D15b, my friend had one and it shit on 350z's..

plus saving gas is cool too :thumb: (not w/turbo though LOL)

PostPosted: Wed Aug 20, 2008 10:07 am
by Graham
I got the engine, s20 gearbox, engine loom and the p28 ecu for £425 delivered which is about $850 depending on the exchange rate

Ive spent a fair bit on new gaskets, belts, seals etc though - it starts to add up haha :P

PostPosted: Wed Aug 20, 2008 11:12 am
by id3379
Graham wrote:I got the engine, s20 gearbox, engine loom and the p28 ecu for £425 delivered which is about $850 depending on the exchange rate

Ive spent a fair bit on new gaskets, belts, seals etc though - it starts to add up haha :P


JDM or Go Home

PostPosted: Wed Aug 20, 2008 12:50 pm
by sqsi
I picked up my JDM D15B from Eli @ VBmotorsport delivered to my house for $1.020.00. Engine, Trans and P08 ECU.

PostPosted: Wed Aug 20, 2008 2:18 pm
by Graham
id3379 wrote:
Graham wrote:I got the engine, s20 gearbox, engine loom and the p28 ecu for £425 delivered which is about $850 depending on the exchange rate

Ive spent a fair bit on new gaskets, belts, seals etc though - it starts to add up haha :P


JDM or Go Home


I am home :?

Its out an import vti my friend owns :P JDM AS FUK y0

PostPosted: Wed Aug 20, 2008 5:12 pm
by id3379
Graham wrote:
id3379 wrote:
Graham wrote:I got the engine, s20 gearbox, engine loom and the p28 ecu for £425 delivered which is about $850 depending on the exchange rate

Ive spent a fair bit on new gaskets, belts, seals etc though - it starts to add up haha :P


JDM or Go Home


I am home :?

Its out an import vti my friend owns :P JDM AS FUK y0


lol smartass :D

PostPosted: Wed Aug 20, 2008 8:12 pm
by Civic_HatchSI
sunrise japaness my buddy got his d15b from them $600 to the door.

PostPosted: Thu Aug 21, 2008 6:50 am
by id3379
JDM-Chick wrote:sunrise japaness my buddy got his d15b from them $600 to the door.


nice thanks for that info holly, i'll hit them up :thumb:

PostPosted: Thu Nov 27, 2008 4:08 pm
by pete1civic
i got a d15b and i was wondering if it was jdm or how could you tell