a6 crank in z6 block
Posted: Wed Oct 15, 2008 3:34 pmwill it work 
http://www.knology.net/~jediklc/specs.htm
according to this it should
Page 1 of 1
Posted: Wed Oct 15, 2008 3:34 pmPosted: Wed Oct 15, 2008 5:00 pmPosted: Wed Oct 15, 2008 5:46 pmhonda part numbers for both cranks are the same but the part number for the thrust washers is different
any ifo will help
any ifo will help
Posted: Wed Oct 15, 2008 5:47 pmyea it should work a buddy of mine has done it but in a different way he used it in a D15 after boring it out and doing work to make it a D16 then threw in the rods and stuff.......
So it should work since his engine ran fine. and according to that chart it should work as well and if you want more id suggest d-series.org since they have pretty much done it all...
So it should work since his engine ran fine. and according to that chart it should work as well and if you want more id suggest d-series.org since they have pretty much done it all...
Posted: Wed Oct 15, 2008 9:11 pmyes it will, no mods necessary.
oil pump is the same too.
oil pump is the same too.