Civic EG

Posted: **Sun Dec 21, 2008 8:05 pm**

If im not mistaken the dohc zc is obd0? I currently have a d15b7, my question is since im obd1 do I have to get a jumper harness or something in order to get it to work? Is there any other mods that are needed in doing this swap? thanks

Posted: **Sun Dec 21, 2008 8:09 pm**

they did make a couple gens of the ZC and your best luck woudl be to get the obd1 version. that came in 92-95 civics...now you can get a obd0 motor but jumper harnesses arnt the greatest option your best option woudl be to get a obd1 dist.

now your biggest problem with not getting the full swap is the ecu you could chip n tune but what you really need in the P29 ecu....

Posted: **Sun Dec 21, 2008 8:13 pm**

well i did get the p29 ecu it came with the swap. So all i need to do is get an obd1 distributor? They didnt make any dohc d in a civic did they?

Posted: **Sun Dec 21, 2008 8:27 pm**

i was going to swap the same motor in my car.... heres a thread i started, hope it helps u out :thumb:

http://civic-eg.com/viewtopic.php?t=6434

Posted: **Sun Dec 21, 2008 9:51 pm**

hatchin06 wrote: So all i need to do is get an obd1 distributor?

Have you tried your distributor?, from the d15